Docs · Set up

Set up a kiosk.

A tablet or a touch totem at your event, where guests take their own photo without their phone. Pair it once, keep it awake, lock it on its page. The kiosk is in beta.

Before you start

A tablet with a camera and a recent browser, such as an iPad or an Android tablet. Or a touch totem with a webcam.

The kiosk address, from the admin, once Kiosk is on in the console. It ends with /kiosk.

A charger of 20 W or more, in a wall outlet. A phone charger or a computer’s USB port may not keep up all day.

A stand or a holder near that outlet, out of direct sun.

The lead REMOTE, on their phone. Or the admin, in the console.

Part 1

Pair the kiosk.

01

Open the kiosk address in the tablet’s browser.

Type it in full, with its https://, in Safari on an iPad or Chrome on Android. The browser asks for the camera at the first photo: allow it. On an iPad, set it to Allow for good before the event, in Settings › Apps › Safari › Camera. Otherwise Safari asks again in front of a guest.

02

The tablet shows a QR code and a code.

It reads New kiosk, with a 5⁠-⁠character code, until it is paired.

03

Scan the QR code with REMOTE, then name the kiosk.

The lead REMOTE scans it with their phone’s camera: REMOTE opens, ready to add the kiosk. Name it, such as “Entrance kiosk”, and tap Add. In REMOTE, Displays › Kiosks › Add a kiosk does the same, or type the code in the Code field.

No REMOTE at hand: the admin pairs it in the console, on the Kiosk page, with Authorize.

04

Take a test photo.

Go through every step as a guest would, up to the QR code, and check that the photo reaches the screens. If photos are approved first, it waits in Approve on REMOTE. The kiosk stays paired, even after a restart.

What guests see

A touch anywhere, a 3⁠-⁠second countdown, then Keep this one?, with two retakes.

Make it yours: swipe to change the frame, tap a sticker to place it, drag it off the photo to remove it.

Almost there: their first name, the consents, never checked in advance, and their email if the event asks for it.

It’s on the wall!: the removal code, and a QR code that puts the photo on the guest’s own phone, once, for 5 minutes.

Nothing stays on the tablet: everything is cleared after each guest, and after a short while untouched.

Part 2

Ready for guests all day.

05

Keep it plugged in and awake.

On an iPad: Settings › Display & Brightness › Auto-Lock › Never. On Android, turn on Stay awake in Developer options, which appear after seven taps on Build number: the screen stays on while charging. Or choose the longest screen timeout.

06

Set the screen 32 to 47 inches (80 to 120 cm) high, facing guests.

Tilt it toward the guest, so a guest in a wheelchair can reach and see it too, away from glare. Then lock the tablet’s rotation. If the picture still shows sideways or upside down, the admin sets Rotation on its card in the console, and the Camera: front, back or webcam.

07

Last, lock the tablet on the kiosk page.

Last, because a locked tablet cannot open its settings.

iPad

Turn on Guided Access in Settings › Accessibility, with a passcode and Display Auto-Lock on Never. Then, on the kiosk page, triple-click the top button (the Home button on older iPads) and tap Start.

Android

Give the tablet a screen lock PIN, then turn on app pinning in the security settings, with the PIN asked before unpinning. Then, on the kiosk page, open the recent apps, tap the browser’s icon and Pin.

08

Try it on the real tablet before the event.

Go through every step, from the first touch to the QR code on a phone. Then leave it untouched longer than its screen timeout, and check that it stays awake. The camera, the keyboard and the lock only show on the real device.

If it does not work

“Kiosk is not switched on for this event”

The admin checks Kiosk in Advanced, in the console.

“This kiosk is taking a short break”

It is paused. Resume in REMOTE, under Displays › Kiosks.

“The wall is taking a short break”

The whole wall is paused. Resume the wall in REMOTE.

“The camera is not available”

Allow the camera for the browser in the tablet’s settings, then reload the page.

Back to the welcome, photo gone

Normal. After 45 seconds untouched, or 20 once an email is typed, it asks “Still there?”, then clears everything.

A guest’s QR code has expired

It works once, for 5 minutes. The removal code still works, with the team on REMOTE.

The kiosk shows its code again

It was deleted in the console, or its browser lost its data. Pair it again.

No touch keyboard on a Windows totem

In Settings › Time & language › Typing › Touch keyboard, set “Show the touch keyboard” to “When no keyboard attached”.

Next guide

Live · Event team

Run your event from REMOTE

Sign in on your phone and keep every screen in hand during the event.

During an event

Pause the kiosk from REMOTE first, then write to us from the contact page. This guide is also in REMOTE, under More › Help and guides.