Docs · Live

Run your event from REMOTE.

REMOTE puts every screen of your event on your own phone. This guide takes you from signing in to handling an incident.

Before you start

Your phone, charged, on the venue’s Wi⁠-⁠Fi or on 4G. A power bank on long days.

Your invitation email, from noreply@limelade.com. Its subject starts with “Your REMOTE access for”.

Nothing to install: REMOTE opens in the browser.

Part 1

Sign in to REMOTE.

01

Open your invitation email.

Its subject starts with “Your REMOTE access for”. Tap its link.

02

Ask for a sign-in code.

Type the email, then tap Send me a code. Use the address the invitation was sent to. Wrong address: tap Use a different email.

03

Type the 6⁠-⁠digit code from the email.

It arrives as “Your REMOTE code”. Type it or paste it, then tap Sign in. It works once, for 15 minutes. Not arrived, or expired: tap Send a new code.

You are in. Closing the browser does not sign you out: next time, it is one tap.

No invitation: ask the lead REMOTE. They tap Team › Connect a phone and show you a QR code. Scan it with your phone’s camera, type your first name and email, then wait for their Activate.

Part 2

The ten⁠-⁠minute check.

Before the doors open, once the screens are on and you are signed in.

04

Every screen shows the photos.

In Displays, each screen says On, none Not full screen. A screen still waiting: the lead REMOTE adds it with Displays › Add a display.

05

The QR code scans from where guests will stand.

Too small: fewer Rows, or In a corner, in Displays › How the wall looks.

06

A photo reaches every screen.

Once live, scan the QR code with your phone and send a photo, like a guest. Then tap Displays › Show a test photo: the last photo shows large again on every screen.

07

The kiosk is ready, if the event has one.

In Displays › Kiosks, it says On. The tablet is plugged in, locked on its page, and you took one photo on it.

08

The rules for new photos are as agreed.

Check More › Rules for new photos: approval first, presence code, surge protection, delayed display.

09

A pause message is in mind.

You type it on Live now once the screens are paused, such as “Back after the keynote”.

10

You know who the lead REMOTE is.

The crown in Team marks them. Only the lead REMOTE adds people and screens.

11

You have practiced once.

Ask an admin for the practice REMOTE: every button answers, and nothing reaches the event.

Part 3

Run the screens.

REMOTE has four tabs: Live now, Displays, Team and More. At the top of every page: Quick hide, the bell of the alerts, and ?.

Keep Live now open.

At the top, a status card says whether all is well, or the one thing to do, with its button.

Pause the wall

Every screen shows the pause message, and guests cannot send. Photos already on their way wait in Approve. While paused, type a Pause message, such as “Back at 2 p.m.” (up to 80 characters). Resume the wall brings the photos back.

Filming the stand

While you photograph or film the room, for 5, 15 or 30 minutes, only photos cleared for marketing show, without first names. It stops by itself.

The main display

From going live, a pink banner counts the photos still needed to fill it. Everyone on the team scans the QR code and sends one, like a guest.

React at once with Quick hide.

At the top of every page, once the event is live.

Hide the last photo: it leaves every screen at once.

Hide the last 5 minutes: every photo of the last 5 minutes leaves the screens. Undo is in Live now › Moderate.

Pause the wall.

Approve photos in Live now.

When photos must be approved first, or during a pause, new photos wait in Approve. The phone rings and Live now shows a badge.

Tap Show on the wall or Hide. With several waiting: Show all or Hide all.

Hide after the fact in Moderate.

Emergency hide: the last photos, or everything from the last 1 to 60 minutes. Last hide shows what went, with Undo. Or hide photo by photo, among those on the screens now or all of them.

Set how the photos look in Displays.

How the wall looks: all screens or one, then the layout, the rhythm, the QR code and the effects. Details in Install a screen.

Pause a kiosk in Displays.

In Displays › Kiosks, anyone taps Pause or Resume. A paused kiosk takes no photo. The lead REMOTE adds one with Add a kiosk.

Change the rules in More.

Rules for new photos. Each change asks for confirmation, then every REMOTE gets an alert under the bell.

Approve photos first

Every new photo waits in Approve.

Delayed display

Each photo waits a few seconds before the screens. Reject it from Live now.

Presence code

A 6⁠-⁠digit code changes in a corner of every screen. Guests type it to send.

Surge protection

Dozens of new phones in a minute turn approval on by itself, with an alert.

If the admin turned a rule on, only the admin turns it off. In This phone: Unlock sign-in, Replay the tour, and Sign out of this phone for a shared phone at the end of the day.

Let people in from Team.

For the lead REMOTE.

Connect a phone

A QR code for the phone next to you, once, for 2 minutes. Then Activate or Decline. Invite by email sends an invitation instead.

A teammate’s card

Make them the lead REMOTE (they accept within 15 minutes), show their Sign-in QR when the code email does not arrive, edit them, Disable or remove them.

Roamers

Add a roamer by first name, then let them scan the QR code with their phone. It works once, within 7 days: Show a new QR code if they lost it. Revoke stops their phone from sending; photos already sent stay.

A REMOTE opened on a new phone

A banner tells you. OK if you expected it, Disable if not.

Remove a photo when a guest asks.

In Live now › Moderate, find it by Code (such as K7M⁠-⁠4QP), first name or email, then tap Find the photo. Show it to the guest full screen: Yes, delete it erases the photo, the first name and the email for good.

If it does not work

On the screens

A bad photo on screen

Quick hide › Hide the last photo, or Live now › Moderate › Emergency hide. Then turn on Approve photos first in More.

No photo arrives

Check for a pause, photos waiting in Approve, or delayed display.

A screen shows its QR code again

It was disconnected. The lead REMOTE adds it again with Displays › Add a display.

A screen is black or frozen

Reload the page on the screen. It comes back paired. Then check its network.

One screen shows the pause message while the others run

An admin paused it from the console. It resumes there.

A screen says it isn’t in full screen

Click once anywhere on it. Only computers say so.

A guest reads “Lots of photos at once!”

The event is very busy. Their photo waits on their phone and leaves within a few minutes: ask them to keep the page open.

Guests say the QR code does not work

Ask them to scan the screen itself, not a photo of it.

A flood of photos from outside the venue

In More › Rules for new photos, turn on the presence code and Approve photos first.

Signing in

No email

Look for noreply@limelade.com in spam, then tap Send a new code.

No invitation

The lead REMOTE taps Team › Connect a phone. Scan its QR code, then wait for Activate.

Code refused

It works once, for 15 minutes. Tap Send a new code.

Sign-in blocked

Wait a moment and try again. Or tap More › This phone › Unlock sign-in on a phone already signed in, or ask the admin.

No Connect a phone or Add a display

Only the lead REMOTE adds people and screens.

A teammate cannot sign in

The lead REMOTE checks their email on their card, or shows their Sign-in QR.

You lost your phone

Ask an admin to sign you out of REMOTE. Your phones leave it at once. Then sign in on another phone.

Signed out without warning

An admin may have signed you out. Sign in again with your email and a new code. Refused: ask the lead REMOTE or the admin.

For help on the page you are on, tap ? at the top of REMOTE. More › Help and guides holds the rest: the manual, and the guides, quick starts and frequent questions in English, French, German, Italian or Spanish.

Next guide

Live · Guests and roamers

Send photos to the screens

For guests and roamers, send a photo from your phone and remove it with its code.

During an event

Pause the screens from REMOTE first, then write to us from the contact page. The full manual is in REMOTE, under More › Help and guides.